HomeProjectsToolsBins
MultiboardBoxShelfPhoto holder45° tilted bin
BasketsTraysWands
PetTreat jarPoop bag holderTagsFood scoopFood container
Drawer organizerDesk organizerConsole
LanguageEnglishPortuguês (Brasil)
Settings
Multiboard
Export STL
Shape

A photo of the object's end, head-on, lying the way it will sit on the wall. The photo only gives the shape; you type the size below.

The outline shows over the photo: drag, add or delete points until it matches. Or draw over it by clicking the corners: without auto-tracing, the photo doesn't count toward your photo limit. The photo, outline and measurements are saved with the part, visible only to you.

✗ close, from abovezoom 2–3×✓ far, level
  • Step back 50 cm to 1 m and zoom 2× to 3×: the body hides behind the end.
  • Camera level with the middle of the end, looking straight, no tilt.
  • Plain background, a different color from the object.
  • If the body still shows, use Draw over.

No photo: rectangle. The bar on the left is the board.

Object size
Widththe upright face, end to end
mm
Thicknessfrom the face against the board to the front face
mm
Holder length25 mm along the object — print one for each end
c
Object fit
Clearancegap around the object, per side
mm
Front liphow much the front edge holds the object; it slides in from the end
mm
Multiboard snapsone holds a light item; use more if it's heavy
Printing
Wall
mm
Snap clearancethe one that fit snugly on the test coupon
mm
Generating the base model…